Skip to Main Content »

0845 459 1006 LO-CALL NUMBER

Your shopping cart is empty

Wyrestorm EX-1UTP-IR-70 HDMI Extender

Be the first to review this product

Availability: In stock


Quick Overview : Wyrestorm EX-1UTP-IR-70 HDMI Extender

Wyrestorm EX-1UTP-IR-70 HDMI Extender

70M Single Cat5e HDBaseT Extender with RS232 Pass Thru and Bi-Directional IR.

The WyreStorm EX-1UTP-IR-70 balun set uses new HDBaseT technology, but in a cut-down version known as HDBaseT Lite, and extends your HDMI 1080p, 3D video and Dolby TrueHD/DTS Master Audio (or lower audio formats), with bi-directional IR and RS232 for control up to 70m away from your HDTV HDMI source using a single Cat6 UTP cable.

Wyrestorm EX-1UTP-IR-70 HDMI Extender

Double click on above image to view full picture

Zoom Out
Zoom In

More Views of the Wyrestorm EX-1UTP-IR-70 HDMI Extender


Wyrestorm EX-1UTP-IR-70 HDMI Extender

How it works

The WyreStorm EX-1UTP-IR-70 sender (TX-70IR-PP) unit sits next to your computer, Blu-ray player or SkyHD box. Use an HDMI cable to connect your HDMI video source to the sender. The WyreStorm EX-1UTP-IR-70 receiver (RX-70IR-PP) sits next to your HDMI display - up to 70m away for 1080p over Cat6. The display plugs into the back of the RX-70IR-PP receiver. A single Cat6 cable is required to connect the sender and the receiver units to each other.

HDBaseT Lite vs HDBaseT

2K resolution (compared to 4k resolution with full HDBaseT)
36bit Deep Colour supported (compared to 48bit with Full HDBaseT)
6.75 Gbps bandwidth range/signalling rate (compared to 10.2Gbps with full HDBaseT)
70m distance range of matrix/extenders – (compared to 100m HDBaseT) under perfect transmission conditions*
No Ethernet connection over the same cable
Cable distances and connections

Like all HDMI extenders, these units are intended to be used on a direct point to point basis, ideally without any wall data outlets or passing through a patch panel. Any connections in the Cat6 cable will inevitably reduce the maximum distance that the HDMI signal can travel, and may cause complete loss of video and audio. Having said this the WyreStorm EX-1UTP-IR-70 has the ability of buffering and amplifying. Series connection of WyreStorm EX-1UTP-IR-70 achieves long distance transmission of HDMI signal so two pairs or more WyreStorm EX-1UTP-IR-70 can be used to create a larger distribution (ie by daisy chaining).

If you have any doubts about your choice of extender please call us and we will do the best we can to advise you on your own particular situation.

NB: This HDMI extender system carries HD digital audio and video. Both the sender and receiver are powered, each by its own plug top power supply. The RX-70IR-PP unit also has built-in ESD (Electro Static Discharge) protection to avoid interference of the AV quality.

The WyreStorm EX-1UTP-IR-70 balun set is HDCP compliant.

Package Includes:

One WyreStorm EX-1UTP-IR-70 sender (TX-70IR-PP)
One WyreStorm EX-1UTP-IR-70 receiver (RX-70IR-PP)
Two IR receivers
Two IR flasher emitters
Two 5v Power Supplies

Extends HDMI1.4 at 1080p60 up to 70m, and works with 3DTV
An IR emitter in the transmitter and the included IR receiver which connects to the receiver allow bi-directional IR remote control of source devices from remote viewing location and vice versa
Supports resolutions up to 1080p and 3DTV (2 x 1080p)
Supports high bit-rate audio formats (Dolby TrueHD / DTS Master Audio)
Delivers uncompressed 7.1 channel digital audio
Auto-adjustment of feedback, equalisation and amplification, you do not need to make manual adjustments for the length of the cable, although this is possible using the DIP switches
Supports 36bit colour depth
Supports refresh rates of 24Hz, 30Hz, 50Hz and 60Hz
Fully HDMI and HDCP compliant (when both power supplies are used)
ESD protection inside


Signaling Rate: 6.75 gigabits per second
Single Link Range: 1080p@60Hz @48 b/pixels, 3D and 4Kx2K
Input Video Signal:0.5 - 1.0 volts p-p
Input DDC Signal: 5 volts p-p (TTL)
Input HDMI Connector
Output HDMI Connector: Molex 24 pin female
Link Connectors: RJ-45
RS232: 9 pin Dsub
Power Consumption: 7.5 Watts (max)
Dimensions: 76mm x 105mm x 27mm (each unit)
Shipping Weight: 0.5kg

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.