Skip to Main Content »

0845 459 1006 LO-CALL NUMBER

Your shopping cart is empty

Wyrestorm MX-0404-QI 4X4 Bundle Pack

Be the first to review this product

Availability: In stock

Price On Application

Quick Overview : Wyrestorm MX-0404-QI 4X4 Bundle Pack

Wyrestorm MX-0404-QI 4X4 Bundle Pack.

Extend your HD sources to 4 TV's around the home for a fantastic price with this kit.

WyreStorm MX-0404-QI main unit
Printed instruction manual (Digital copy of manual downloadable from product page)
Flash USB stick containing PC software and digital copy of instruction manual. (also downloadable from product page)
Matrix mounting brackets
1 x 12VDC power supply
1 x IR Extension cable (IR RX)
4 x IR TX IR transmitters for placed at source location to control sources from display zone
1 x MX-0404-QI remote control incl. battery (size/type: CR2025 3V)
4 x RX-1UTP-IR-40 HD display receivers
4 x Receiver mounting brackets
4 x 5VDC power supplies
4 x IR RX IR receiver eyes for placed at display location to control sources remotely.

Wyrestorm MX-0404-QI 4X4 Bundle Pack

Double click on above image to view full picture

Zoom Out
Zoom In

More Views of the Wyrestorm MX-0404-QI 4X4 Bundle Pack


Wyrestorm MX-0404-QI 4X4 Bundle Pack

The WyreStorm 4x4 Quick-Install pack is a system of HD switching and extension that comprises of a 4 Input/4 Output HD Matrix together with 4 display receivers that together provide a total solution for single-cable HD Distribution and Control over distances of up to 40m/131ft) in residential or commercial settings.

The MX0404-QI pack enables ANY four HD devices to be viewed independently and simultaneously on ANY four displays, with full 3D support, over distances of up to 40m/131ft, with full control of the connected sources as well as output from the matrix from display locations via wide band IR control of source devices or RS232.

The system itself is entirely cabled on single Cat5e/6/7 UTP runs to each display point throughout the location for the quickest, most convenient and cost effective means of transmitting and controlling full, uncompressed 1080p HD video and HD audio we could think of to make sure your time on-site is as productive (and brief) as possible.


Time is money.

We all know it. Especially when it comes to HD installation.

Time saved in choosing the right combination of HD equipment you know will work is just as important as getting it all up and running as quickly and efficiently as possible so you can leave a satisfied customer and move onto the next job.

We call this system ‘Quick Install’ because that is exactly what you should expect; with great emphasis placed on reduced installation time and an ease of connection that will enable the installer to maximise their productivity on site, avoiding time-consuming compatibility and configuration issues that can unnecessarily prolong a project or in terms of installation time or call-backs.

Specifically developed and manufactured to meet the needs of the installer, the MX0404-QI is a dedicated system of HD distribution and control, combining a 4x4 Matrix and four single cable receivers – all of which of which are designed work seamlessly together for complete compatibility and full management of handshakes, screen resolutions and HD signal distribution to each display point, whether in a residential or commercial environment.

Time is money. With the WyreStorm Quick Install pack in your set up, you'll have a little more of both.

NOTE: For longer transmission distances, LAN control and Ethernet pass-through, please see our HDBaseT range of matrices, transmitters, receivers and extender sets.
Related products

40m (131ft) 1W IR & EDID Mgmt.

The WyreStorm EX-1UTP-IR-40 is a short range single cable extender set capable of transmiting full 1080p HD video, HD audio and one-way IR source control together through the HDMI signal over a Cat5e/6/7 cable distances up to 40m (131ft) under ideal transmission conditions*

Quick and easy installation – set up in seconds straight out of the box.
Simplified ports - Input: HDMI – Output: integrated RJ45 connectors for a single Cat5e/6/7 UTP cable to each display point for ease of installation
Conforms to IEEE-568B standards
Each HDMI port also supports DVI signals
Each Output port can be fed to multiple displays (cascaded)
Enables up to 4 HDMI video/audio devices to be independently switched through up to 4 HDMI displays or projectors for uncompressed digital distribution
Each output able to show any connected source simultaneously regardless of whether the input carries HDCP encryption
Reads and copies EDID from connected devices with additional EDID configuration through customisable DIP switch settings if necessary
2k resolution supported
Fully 3D compatible – Frame packing/sequential 3D (Blu-ray) and interlaced stereoscopic 3D (satellite broadcasts)
Supports all high definition resolutions up to and including 1080p and standard video formats
RS232 port
Choose from 6 switching modes – infrared remote control, front panel buttons, local IR, IR call-back, LAN and RS232
Simple switching remote control included, which can also be learned into a universal remote handset to allow the control of multiple devices from one handset
Fully compatible for integration with market leading control systems
4 x IR 3.5mm mini-jack ports for each output to link IR from control system to control display
Additional infrared extension port for longer IR connections
HDMI v.1.3
Supports 24Bit Colour depth
Signalling rate of 6.75 Gbps
Pack comes complete with 1 x 4x4 Matrix with 19” rack brackets, 4 x 40m IR receivers with mounting brackets, IR receivers, emitters and a Matrix remote control handset
Additional features included on the RX-1UTP-IR-40
Transmits one-way signal together with the HDMI signal over a single Cat5e/6/7 cable.
Receivers capable of 1080p transmissions up to 40m/131ft under ideal conditions*
For even greater control and fine tuning, each receiver features distance setting adjustment for optimising the transmission signal
Protection against ESD (electrostatic discharge) included within the unit to further stabilise transmission.
LED indications for clear power and video signal selection
5v mains supply included
Fully cascadable to further lengthen transmission
*NOTE: ideal conditions denote cable run is within specified distance range of product, no electrical interference, the use of straight cable runs with no bends or kinks and no patch panels or wall outlets used. Please be advised that the presence of any of these factors in your installation may compromise bandwidth and signal strength.
For longer transmission distances, RS232 control and Ethernet pass-through, please see our HDBaseT range of matrices, transmitters, receivers and extender sets.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.